Specifications

8-7
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
Group Listen Enables both the handset and speaker to be active at the same time, so that one user can
talk into the handset while other users listen over the speaker.
GARP Enabled Indicates whether the phone learns MAC addresses from Gratuitous ARP responses.
Voice VLAN Enabled (applies to
7911G only)
Indicates whether the phone allows a device attached to the PC port to access the Voice
VLAN.
Auto Line Select Enabled Indicates whether the phone shifts the call focus to incoming calls on all lines.
DSCP for Call Control DSCP IP classification for call control signaling.
DSCP for Configuration DSCP IP classification for any phone configuration transfer.
DSCP for Services DSCP IP classification for phone-based services.
Security Mode Displays the security mode that is set for the phone.
Web Access Enabled Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Span to PC Port (applies to 7911G
only)
Indicates whether the phone will forward packets transmitted and received on the
network port to the access port.
PC VLAN (applies to 7911G only) VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC.
CDP: PC Port
(applies to 7911G only)
Indicates whether CDP is enabled on the PC port (default is enabled).
LLDP: PC Port Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC port.
LLDP-MED: SW Port Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery
(LLDP-MED) is enabled on the switch port.
LLDP Power Priority Advertises the phone’s power priority to the switch, enabling the switch to
appropriately provide power to the phones. Settings include:
• Unknown—default
• Low
• High
• Critical
LLDP Asset ID Identifies the asset ID assigned to the phone for inventory management.
LLDP Power Priority Advertises the phone’s power priority to the switch, enabling the switch to
appropriately provide power to the phones. Settings include:
• Unknown—default
• Low
• High
• Critical
LLDP Asset ID Identifies the asset ID assigned to the phone for inventory management.
Table 8-2 Network Configuration Area Items (continued)
Item Description