Specifications

7-9
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey.
Table 7-4 provides a list of Network Statistics items and a description of each.
Table 7-4 Network Statistics Screen
Item Description
Rx Frames Number of packets received by the phone
Tx Frames Number of packets sent by the phone
Rx Broadcasts Number of broadcast packets received by the phone
One of the following
values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Cause of the last reset of the phone
Elapsed Time Amount of time that has elapsed since the phone connected to Cisco Unified Communications
Manager
Port 1 Link state and connection of the Network port
Port 2 (applies to 7911G
only)
Link state and connection of the PC port (for example,
Auto 100 Mb Full-Duplex means that
the PC port is in a link up state and has auto-negotiated a full-duplex, 100-Mbps connection)