Specifications

5-16
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 5 Configuring Features, Templates, Services, and Users
Configuring Corporate and Personal Directories
Configuring Corporate and Personal Directories
The Directories menu on the Cisco Unified IP Phone 7906G and 7911G gives users access to several
directories. These directories can include:
• Corporate Directory—Allows a user to look up phone numbers for co-workers.
To support this feature, you must configure corporate directories. See Configuring Corporate
Directories, page 5-17 for more information.
• Personal Directory—Allows a user to store a set of personal numbers.
To support this feature, you must provide the user with software to configure the personal directory.
See Configuring Personal Directory, page 5-17 for more information.
Table 5-2 Configuration Parameters for Cisco Unified IP Phone
Configuration
Window Path Parameters
Enterprise Phone
Configuration
window
System > Enterprise Phone
Configuration
You can set the following parameters in any of the three
configuration windows:
• Settings Access
• Video Capabilities
• Web Access
• Load Server
• RTCP
• Peer Firmware Sharing
• Cisco Discovery Protocol (CDP): Switch Port
• Cisco Discovery Protocol (CDP): PC Port
• Link Layer Discovery Protocol - Media Endpoint Discover
(LLDP-MED): Switch Port
• Link Layer Discovery Protocol (LLDP): PC Port
• IPv6 Load Server
• 802.1x Authentication
Note When you set the parameters, select the Override Common
Settings checkbox for each setting you wish to update. If
you do not check this box, the corresponding parameter
setting does not take effect. If you set the parameters at the
three configuration windows, the setting takes precedence
in the following order:
• Phone Configuration window
• Common Phone Profile window
• Enterprise Phone Configuration window