Specifications

5-12
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Privacy Prevents users who share a line from adding themselves to a call
and from viewing information on their phone screens about the
call of the other user.
For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
Cisco Unified IP Phone
Configuration.
• Cisco Unified Communications
Manager System Guide, Cisco
Unified IP Phones.
• Cisco Unified Communications
Manager Features and Services
Guide Barge and Privacy.
Programmable line
keys (PLK)
The administrator can assign features to line buttons. Softkeys
normally control these features; for example, New Call, Call
Back, End Call, and Forward All. When the administrator
configures these features on the line buttons, they always remain
visible, so users can have a “hard” New Call key.
For more information, refer to:
• Cisco Unified Communications
Manager System Guide, Cisco
Unified IP Phones.
• Cisco Unified Communications
Manager Administration Guide,
Phone Button Template
Configuration.
• Cisco Unified Communications
Manager Administration Guide,
Modifying Phone Button
Templates
Protected calling Provides a secure (encrypted) connection between two phones.
A security tone is played at the beginning of the call to indicate
that both phones are protected. Some features, such as
conference calling, shared lines, Extension Mobility, and Join
Across Lines are not available when protected calling is
configured. Protected calls are not authenticated.
For more information about security,
see Overview of Supported Security
Features, page 1-11.
For additional information, refer to
Cisco Unified Communications
Manager Security Guide.
Quality Reporting
Tool (QRT)
Allows users to use the QRT softkey on a phone to submit
information about problem phone calls. QRT can be configured
for either of two user modes, depending upon the amount of user
interaction desired with QRT.
For more information refer to:
• Cisco Unified Communications
Manager System Guide, Cisco
Unified IP Phones.
• Cisco Unified Communications
Manager Features and Services
Guide, Quality Report Tool.
Redial Redials the last number dialed on the Cisco Unified IP Phone. Requires no configuration.
Ring setting Identifies ring type used for a line when a phone has another
active call
For more information refer to the
Cisco Unified Communications
Manager Administration Guide,
Directory Number Configuration.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference