Specifications

5-11
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Multilevel
Precedence and
Preemption
(MLPP)
(SCCP phones
only)
Allows properly validated users to place priority calls. If
necessary, users can preempt lower-priority phone calls. Also
allows the use of the call-forward alternate party (CFAP) feature
for forwarding a precedence call.
For more information refer to the
Cisco Unified Communications
Manager Features and Services
Guide, Multilevel Precedence and
Preemption.
Multiple Calls Per
Line Appearance
Each line can support multiple calls. Only one call can be active
at any time; other calls are automatically placed on hold.
For more information refer to the
Cisco Unified Communications
Manager Administration Guide,
Cisco Unified IP Phone
Configuration.
Music on hold Plays music while callers are on hold. For more information refer to the
Cisco Unified Communications
Manager Features and Services
Guide, Music On Hold.
Mute Mutes the microphone from the handset or headset. Requires no configuration.
Onhook call
transfer
Allows a user to press a single Transfer softkey and then go
onhook to complete a call transfer.
For more information refer to the
Cisco Unified Communications
Manager System Guide, Cisco
Unified IP Phones.
Onhook predialing Allows a user to dial a number without going off hook. The user
can then either pick up the handset or press the Dial softkey.
For more information, refer to the
Cisco Unified IP Phone 7962G Phone
Guide, Basic Call Handling chapter.
Other group pickup Allows a user to answer a call that is ringing on a phone in
another group that is associated with the user's group.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, Call Pickup.
Phone secure web
access
Cisco Unified IP Phones can now securely access the web with
the use of a phone trust store called “phone-trust.”
For more information refer to the
Cisco Unified Communication
Manager Security Guide, Security
Overview.
Private Line
Automated
Ringdown (PLAR)
The Cisco Unified Communications Manager administrator can
configure a phone number that the Cisco Unified IP Phone dials
as soon as the handset goes off hook. This can be useful for
phones that are designated for calling emergency or “hotline”
numbers.
For more information refer to the
Configuring PLAR section in the
Directory Number Configuration in
the Cisco Unified Communications
Manager Administration Guide.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference