Specifications

5-8
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Do Not Disturb
(DND)
When DND is turned on, either no audible rings occur during the
ringing-in state of a call, or no audible or visual notifications of
any type occur.
You can configure the phone to have a softkey template with a
DND softkey.
The following DND-related parameters are configurable in
Cisco Unified Communications Manager Administration:
• Do Not Disturb—This checkbox allows you to enable DND
on a per-phone basis. Choose Device > Phone > Phone
Configuration.
• DND Option—Choose “Call Reject” (to turn off all audible
and visual notifications), or “Ringer Off” (to turn off only
the ringer). DND Option appears on both the Common
Phone Profile window and the Phone Configuration window
(Phone Configuration window value takes precedence).
• DND Incoming Call Alert—Choose the type of alert, if any,
to play on a phone for incoming calls when DND is active.
This parameter is located on both the Common Phone
Profile window and the Phone Configuration window.
(Phone Configuration window value takes precedence).
Cisco Unified Communications
Manager Features and Services Guide,
Do Not Disturb.
Fast Dial Service Allows a user to enter a Fast Dial code to place a call. Fast Dial
codes can be assigned to phone numbers or Personal Address
Book entries. (See Services in this table.)
For more information, refer to the
Modifying a Phone Button Template
for Personal Address Book or Fast
Dials, page 5-18
Forced
authorization codes
(FAC)
(SCCP phones
only)
Controls the types of calls that certain users can place.
Note If you are using this feature, you must disable Enbloc
dialing. See Enbloc Dialing for details.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, Client Matter Codes and
Forced Authorization Codes.
Group call pickup Allows a user to answer a call that is ringing on a directory
number in another group.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, Call Pickup.
Help system Provides a comprehensive set of topics that appear on the phone
screen.
Requires no configuration.
Hold/Resume Allows the user to move a connected call between an active state
and a held state.
• Requires no configuration, unless
you want to use music on hold.
See Music on hold in this table
for information.
• See also: Hold Reversion in this
table.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference