Specifications

5-7
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Conference • Allows a user to talk simultaneously with multiple parties
by calling each participant individually. Conference
features include Conference, Join, cBarge, and Meet-Me.
• Allows a non-initiator in a standard (ad hoc) conference to
add or remove participants; also allows any conference
participant to join together two standard conferences on the
same line.
For more information, refer to
• Cisco Unified Communications
Manager System Guide, Cisco
Unified IP Phones and
Conference Bridges.
• The service parameter, Advance
Adhoc Conference, (disabled by
default in Cisco Unified
Communications Manager
Administration) allows you to
enable these features.
Note Be sure to inform your users
whether these features are
activated.
Computer
Telephony
Integration (CTI)
Applications
A computer telephony integration (CTI) route point can
designate a virtual device to receive multiple, simultaneous calls
for application-controlled redirection.
For more information, refer to the
Cisco Unified Communications
Manager Administration Guide, CTI
Route Point Configuration.
Directed Call Park Allows a user to direct an active call to an available directed call
park number. After pressing Transfer, the user dials the directed
call park number to store the call.
For more information refer to Cisco
Unified Communications Manager
Features and Services Guide, Call
Park and Directed Call Park.
Directed call
Pickup
Allows a user to answer a call that is ringing on a particular
directory number.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, Call Pickup.
Direct transfer Joins two established calls (calls that are on hold or in connected
state) into one call and drops the feature initiator from the call.
Does not initiate a consultation call and does not put the active
call on hold.
For more information, refer to the
Cisco Unified Communications
Manager System Guide, Cisco
Unified IP Phones.
Enbloc Dialing
(SCCP phones
only)
Enbloc dialing enables SCCP to send all digits of a phone
number simultaneously. This feature must be disabled if either
Forced Authorization Codes (FAC) or Client Matter Codes
(CMC) dialing is being used.
To disable enbloc dialing, in Cisco
Unified Communications Manager
Administration, go to Device >
Phone. On the Phone Configuration
window, in the “Product Specific
Configuration Layout” area, uncheck
the “Enbloc Dialing” check box, then
click Apply Config, then click Save.
Distinctive Ring Users can customize how their phone indicates an incoming call
and a new voice mail message.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, Custom Phone Rings.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference