Specifications

Configuring Cisco Unified SIP SRST Features Using Redirect Mode (for Version 3.0 Only)
Where to Go Next
46
Cisco Unified SIP SRST 4.0 System Administrator Guide
!
voice register pool 4
id network 10.2.161.0 mask 255.255.255.0
number 1 94... preference 1
preference 5
cor incoming everywhere default
cor outgoing everywhere default
proxy 10.2.161.187 preference 1
max registrations 2
voice-class codec 1
!
! Configures translation rules to be applied in the voice register pools.
!
translation-rule 1
Rule 0 94 91
!
! Sets up proxy monitoring.
!
call fallback active
!
dial-peer cor custom
name 95
name 94
name 91
!
! Configures COR values to be applied to the voice register pool.
!
dial-peer cor list call95
member 95
!
dial-peer cor list call94
member 94
!
dial-peer cor list call91
member 91
!
dial-peer cor list everywhere
member 95
member 94
member 91
!
! Configures a voice port and a POTS dial peer for calls to and from the PSTN endpoints.
voice-port 1/0/0
!
dial-peer voice 91500 pots
corlist incoming call91
corlist outgoing call91
destination-pattern 91500
port 1/0/0
!
Where to Go Next
After configuring basic Cisco Unified SIP SRST, the “Configuring Cisco Unified SIP SRST Features
Using Back-to-Back User Agent Mode (for Version 3.4 and Version 4.0 Only)” chapter describes
additional configurations to increase SIP phone functionality.