Specifications

Configuring the SIP Registrar
How to Configure the SIP Registrar
30
Cisco Unified SIP SRST 4.0 System Administrator Guide
What to Do Next
There are several more voice register pool commands that add functionality, but that are not required.
See the “Configuring Backup Registrar Service to SIP Phones (Using Optional Commands)” section on
page 30 for these commands.
Configuring Backup Registrar Service to SIP Phones (Using Optional
Commands)
The prior configurations set up a basic voice register pool. The configuration in this procedure adds
optional attributes to increase functionality.
Prerequisites
• Prerequisites as described in the “Configuring Backup Registrar Service to SIP Phones” section on
page 26.
• Configuration of the required commands as described in the “Configuring Backup Registrar Service
to SIP Phones” section on page 26.
SUMMARY STEPS
1. enable
2. configure terminal
3. voice register pool tag
4. translate-outgoing {called | calling} rule-tag
5. alias tag pattern to target [preference value]
6. cor {incoming | outgoing} cor-list-name {cor-list-number starting-number [- ending-number] |
default}
7. incoming called-number [number]
8. max registrations value
9. number tag number-pattern {preference value} [huntstop]
10. dtmf-relay [cisco-rtp] [rtp-nte] [sip-notify]
11. end