Specifications

Getting Started
How to Upgrade from Cisco SIP SRST 3.0 to Cisco Unified SIP SRST 4.0
20
Cisco Unified SIP SRST 4.0 System Administrator Guide
Step 3
dial-peer voice tag voip
Example:
Router(config)# dial-peer voice 25 voip
Enters dial-peer configuration mode.
• tag—A number that uniquely identifies the dial peer
(this number has local significance only).
• voip—Indicates that this is a VoIP peer using voice
encapsulation on the POTS network and is used for
configuring redirect.
Step 4
no redirect ip2ip
Example:
Router(config-dial-peer)# no redirect ip2ip
Disables redirection of SIP phone calls to SIP phone calls
on a specific VoIP dial peer using the Cisco IOS voice
gateway.
Step 5
end
Example:
Router(config-dial-peer)# end
Returns to privileged EXEC mode.
Command or Action Purpose