User guide

Known and Resolved Problems
6
Release Notes for Cisco 7200/7400 Series Manager Release 1.1 on Solaris
78-14030-01
CSCdv68771 Uninstallation of CERM using
the script cemf install -r results in
removal of certain shared
packages.
Uninstalling CERM or CGM using script
cemf install -r uninstalls certain shared
packages.
To work around problem in CERM:
1. Log in as root.
2. Go to CERM install directory.
3. Run command ./cerminstall -r
CSCdv75154 When EMS is installed on an
operational setup (with EMS
already installed and objects
already deployed), objects of the
second EM could not be
deployed under the same site.
To work around problem:
1. Install the second EM.
2. Create a hierarchy, similar to the existing
physical view hierarchy, in the technology
view of the second EM.
CSCdv17064 Layer 3 QoS functionality should
not be available for voice cards.
Layer 3 QoS does not apply to voice cards and
their interfaces. Currently no workaround is
available.
CSCdv29627 IP configuration on voice card
interfaces fails.
When you try to save the IP configuration on
voice card interfaces, the IP Failure Information
window appears. Currently no workaround is
available.
CSCdv79724 Save button should not be
highlighted without management
info set.
Save button is highlighted even if you have not set
the management info. However, you can save the
configuration only if you set the management
info.
CSCdv87091 DS1 configuration can be done
without router authentication
info.
When the Cisco 7200/7400 Series Manager
establishes a telnet session with the router for any
CLI operation, it maintains the session for some
time, even after the session in closed. During this
period, even if the device is deleted and
redeployed, DS1 configuration can be done
without setting the management info.
Table 1 Cisco 7200/7400 Series Manager Known Problems (continued)
Bug ID Summary Explanation