User guide

5
Release Notes for Cisco 7200/7400 Series Manager Release 1.1 on Solaris
78-14030-01
Known and Resolved Problems
Table 1 Cisco 7200/7400 Series Manager Known Problems
Bug ID Summary Explanation
CSCdu32799 Print function does not work in
IP, Ethernet, and ATM
configuration windows.
To work around the problem, paste a screenshot of
the configuration window into another application
and then print it.
CSCdu32817 Chassis Configuration window
does not display updated
information.
Updated chassis information is not displayed after
selecting CERM Management > Physical >
Chassis > Configuration.
Refer to Using Cisco 7200/7400 Series Manager
for a listing of relevant fields.
CSCdu37159 Unable to commission power
supply module when deployed
manually.
The option to manually deploy power supplies is
available; the option to manually commission
power supplies is not. As a result, power supplies
may not be discovered properly.
To work around problem, commission the chassis.
CSCdu41694 POS interfaces discovered as
generic SNMP interfaces.
Problem occurs because router is not providing
expected SONET layer support. Therefore, Cisco
7200/7400 Series Manager provides only
available functionality (in this case, Generic and
IP functionality).
CSCdu61481 7200/7400 Series Element
Manager does not support all
fields displayed in ATM dialog
boxes.
Since Cisco 7200/7400 routers do not fully
support ATM MIBs, the 7200/7400 Series
Element Manager cannot support every field
displayed in the following dialog boxes:
• ATM Configuration
• ATM Fault Management
• ATM Status
• ATM PVC Status
Refer to Using Cisco 7200/7400 Series Manager,
which specifies the attributes supported by the
Element Manager.