Specifications

15
Figure 10 AC and DC Power Supplies
AC Power Supplies
Step 1 At the rear of the router, ensure that the power switch on the power supply is in the OFF (0) position.
Step 2 Slide the cable-retention clip to the left, away from the AC receptacle, and plug in the power cable.
Step 3 Secure the cable in the power supply AC receptacle by sliding the cable-retention clip to the right until it fits around
the connector. The cable-retention clip provides strain relief for the AC power cable.
Tip For additional AC power cable strain relief, secure the cable to the power supply handle by inserting a nylon cable tie
through the hole in the handle and around the cable.
Step 4 Plug the AC power supply cable into the AC power source.
Step 5 Repeat Step 1 through Step 4 for the second power supply (if present).
Figure 11 Connecting AC-Input Power
1
Cable retention clip
6
Captive installation screw
2
Captive installation screw
7
M5 grounding lugs
3
AC receptacle
8
Strain relief studs
4
Power switch
9
Power receptacle
5
Handle
10
Power switch
103556
2
3 4 5
7
8
6
10 9
1
103562
Cable-retention clip
Power
switch
Handle
AC power cable
Power
receptacle
Captive
installation
screw