Specifications

Application View Cisco PIM Application
Device Management Page 99 Cisco Router
group prefix for which this entry contains
information about the Candidate-RP.
Group Mask
The multicast group address mask which, when
combined with Group Address (Page 98), gives
the group prefix for which this entry contains
information about the Candidate-RP.
Address
The IP address of the Candidate-RP.
Hold Time
The holdtime of a Candidate-RP. If the local router
is not the BSR, this value is 0.
Expiry Time
The minimum time remaining before the
Candidate-RP will be declared down. If the local
router is not the BSR, this value is 0.
PIM IPM Route Next Hop Table
View
Access: From the Icon Subviews menu for the
CiscoPIMApp Application icon, select PIM IPM Route Next
Hop.
This view provides the PIM IPM Route Next Hop
table, described below.
PIM IPM Route Next Hop Table
This table lists PIM-specific information on a
subset of the rows of the IPM Route Next Hop
Table (Page 88). Each entry in the IPM Route Next
Hop Table whose interface is running PIM and
whose State (Page 89) is pruned has a
corresponding entry in the PIM IPM Route Next
Hop Table. This table contains the following
information.
Group Address
Same as Group (Page 88) in the IPM Route Next
Hop table.
Source Address
Same as Source (Page 88) in the IPM Route Next
Hop table.
Source Mask
Same as Source Mask (Page 89) in the IPM Route
Next Hop table.