Specifications

Application View Cisco PIM Application
Device Management Page 98 Cisco Router
Source Mask
The value of Source Mask from the IPM Route
Table (Page 87).
Upstream Assert Time
The time remaining before the router changes its
upstream neighbor back to its RPF neighbor. This
timer is called the Assert timer in the PIM Sparse
and Dense mode specification. A value of 0
indicates that no Assert has changed the
upstream neighbor away from the RPF neighbor.
Assert Metric
The metric advertised by the assert winner on the
upstream interface, or 0 if no such assert is in
received.
Assert Metric Preference
The preference advertised by the assert winner on
the upstream interface, or 0 if no such assert is in
effect.
RPT Bit
The value (true or false) of the RPT-bit
advertised by the assert winner on the upstream
interface. This value is false if no such assert is
in effect.
Route Flags
Describes PIM-specific flags related to a multicast
state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT
bits.
PIM Rendezvous Point Sets Table
View
Access: From the Icon Subviews menu for the
CiscoPIMApp Application icon, select Rendezvous Point
Sets.
This view provides the Rendezvous Point Sets
table, described below.
Rendezvous Point Sets Table
This table lists PIM information for candidate
Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information
is obtained from received Candidate-RP-
Advertisements. When the local router is not the
BSR, this information is obtained from received
RP-Set messages.
Component
A number uniquely identifying the component.
Each protocol instance connected to a separate
domain should have a different index value.
Group Address
The IP multicast group address which, when
combined with Group Mask (Page 99), gives the