Specifications

Application View Cisco PIM Application
Device Management Page 95 Cisco Router
Window Size
Number of Interval intervals a Cisco multicast
router waits before checking if expected number
of heartbeat packets are received or not.
Count
Number of time intervals where multicast packets
were received in the last Window Size intervals.
Minimum
The minimum number of heartbeat packets
expected in the last Window Size intervals. If
Count falls below this value, an SNMP
trap/notification, if configured, will be sent to the
NMS.
Alert Time
The value of sysUpTime on the most recent
occasion at which a missing IP multicast
heartbeat condition occurred for the group
address specified in this entry. If no such
condition has occurred since the last re-
initialization of the local management subsystem,
this field contains a zero value.
Row Status
Used to create a new row or delete an existing row
in this table. Possible values are active,
notInService, notReady, createAndGo,
createAndWait, and destroy.
Cisco PIM Application
This application (CiscoPIMApp) provides the
following Protocol Independent Multicast (PIM)
management views:
• PIM Interface Table View (Page 96)
• PIM Neighbor Table View (Page 97)
• PIM IPM Route Table View (Page 97)
• PIM Rendezvous Point Sets Table View
(Page 98)
• PIM IPM Route Next Hop Table View (Page 99)
• PIM Candidate Rendezvous Point Table View
(Page 100)
• PIM Component Table View (Page 101)
• Cisco PIM Objects View (Page 102)