Specifications

Application View Cisco IPM Routing Application
Device Management Page 93 Cisco Router
In Limit2
Incoming interface's limit for rate limiting data
traffic, in Kbps.
Join Flag
This Boolean value of true or false indicates
whether this route is created due to SPT
threshold.
MSDP Flag
This Boolean value of true or false indicates
whether this route is learned via MSDP.
Proxy Join Flag
This Boolean value of true or false indicates
whether to send join for this entry.
Metric2
The best metric heard from Assert messages.
Cisco IPM Route Next Hop Table
View
Access: From the Icon Subviews menu for the
CiscIPMRoutApp Application icon, select Cisco Route Next
Hop.
This view provides the Cisco IPM Route Next Hop
table, described below.
Cisco IPM Route Next Hop Table
This table contains information on the next hops
on outgoing interfaces for routing IP multicast
datagrams. Each entry is one of a list of next hops
on outgoing interfaces for particular sources
sending to a particular multicast group address.
Group Address
The IPM Route Group Address, described on
Page 87.
Source Address
The IPM Route Source Address, described on
Page 87.
Source Mask
The IPM Route Source Mask, described on
Page 87.