Specifications

Application View Cisco IPM Routing Application
Device Management Page 91 Cisco Router
Address
The group address which when combined with
the corresponding value of Address Mask
identifies the group range for which the scoped
boundary exists. Scoped addresses must come
from the range 239.x.x.x.
Address Mask
The group address mask which when combined
with the corresponding value of Address identifies
the group range for which the scoped boundary
exists.
Status
The status of this row, by which new entries may
be created, or old entries deleted from this table.
Possible values are active, notInService,
notReady, createAndGo, createAndWait, and
destroy.
Cisco IPM Route Table View
Access: From the Icon Subviews menu for the
CiscIPMRoutApp Application icon, select Cisco Route.
This view provides the Cisco IPM Route table,
described below.
Cisco IPM Route Table
This table contains multicast routing information
for IP datagrams sent by particular sources to the
IP multicast groups known to this router. This
table augments the IPM Route Table (Page 87) and
contains the following information.
Group Address
The IPM Route Group Address, described on
Page 87.
Source Address
The IPM Route Source Address, described on
Page 87.
Source Mask
The IPM Route Source Mask, described on
Page 87.
Prune Flag
A Boolean value of true or false indicating
whether this route is pruned. A pruned route is
one that has an empty outgoing interface list or
all interfaces are in pruned State (Page 89). A