Specifications

Application View Cisco IPM Routing Application
Device Management Page 90 Cisco Router
IPM Route Interface Table View
Access: From the Icon Subviews menu for the
CiscIPMRoutApp Application icon, select Route Interface.
This view provides the IPM Route Interface table,
described below.
IPM Route Interface Table
This table contains the following multicast
routing information specific to interfaces. Double-
clicking any entry in this table opens the IPM
Route Interface Table Entry view, which displays
information for and lets you configure that entry.
IF Index
The IF Index value of the interface for which this
entry contains information.
TTL Threshold
The datagram TTL threshold for the interface. Any
IP multicast datagrams with a Time to Live less
than this threshold will not be forwarded out the
interface. The default value of 0 means all
multicast packets are forwarded out the interface.
Protocol
The routing protocol running on this interface.
Possible values are other, local, netmgmt,
dvmrp, mospf, pimSparseDense, cbt,
pimSparseMode, pimDenseMode, and igmpOnly.
Rate Limit
The rate-limit, in kilobits per second, of forwarded
multicast traffic on the interface. A rate-limit of 0
indicates that no rate limiting is done.
In Mcast Octets
The number of octets of multicast packets that
have arrived on the interface.
Out Mcast Octets
The number of octets of multicast packets that
have been sent on the interface.
IPM Route Boundary Table View
Access: From the Icon Subviews menu for the
CiscIPMRoutApp Application icon, select Route Boundary.
This view provides the IPM Route Boundary table,
described below.
IPM Route Boundary Table
This table lists the router's scoped multicast
address boundaries and contains the following
information.
IF Index
The IF Index value for the interface to which this
boundary applies. Packets with a destination
address in the associated address/mask range
will not be forwarded out this interface.