Specifications

Application View Cisco IPM Routing Application
Device Management Page 88 Cisco Router
Up Time
The time since the multicast routing information
represented by this entry was learned by the
router.
Expiry Time
The minimum amount of time remaining before
this entry will be aged out. The value 0 indicates
that the entry is not subject to aging.
Packets
The number of packets which this router has
received from these sources and addressed to this
multicast group address.
Diff In IF Packets
The number of packets which this router has
received from these sources and addressed to this
multicast group address, which were not received
from the interface indicated by IF Index
(Page 87).
Octets
The number of octets contained in IP datagrams
which were received from these sources and
addressed to this multicast group address, and
which were forwarded by this router.
Protocol
The routing mechanism via which this route was
learned. Possible values are other, local,
netmgmt, dvmrp, mospf, pimSparseDense, cbt,
pimSparseMode, pimDenseMode, and igmpOnly.
This button lets you enable and disable IP
multicast routing.
IPM Route Next Hop Table View
Access: From the Icon Subviews menu for the
CiscIPMRoutApp Application icon, select Route Next Hop.
This view provides the IPM Route Next Hop table,
described below.
IPM Route Next Hop Table
This table contains the following information on
the next hops on outgoing interfaces for routing
IP multicast datagrams. Each entry is one of a list
of next hops on outgoing interfaces for particular
sources sending to a particular multicast group
address.
Group
The IP multicast group for which this entry
specifies a next hop on an outgoing interface.
Source
The network address which when combined with
the corresponding value of Source Mask
IPM Route Enable