Specifications

Application View Cisco Syslog Application
Device Management Page 85 Cisco Router
Software_Filter
Set to true to filter out all Syslog messages that
deal with internal software such as PARSER, RSP,
GRPGE, etc.
Hardware_Configuration_Filter
Set to true to filter out all Syslog messages that
deal with Hardware Configuration of the device
such as IOCARD, MODEM, DIALSHELF, etc.
Security_Filter
Set to true to filter out all Syslog messages that
deal with the Security of the system such as
RADIUS, SECURITY, etc.
Environment_Filter
Set to true to filter out all Syslog messages that
deal with Environment variables such as LCFE,
LCGE, etc.
Connection_Configuration_Filter
Set to true to filter out all Syslog messages that
deal with Connection Configuration of the device
such as MROUTE, ISDN, X25, etc.
Pix_Firewall_Filter
Set to true to filter out all Syslog Messages that
deal with the Cisco PIX Firewall device.
Cisco SysLog Basic
Configuration View
Access: From the Icon Subviews of the CiscSysLogApp
Application icon, select Basic.
This view displays the following information.
Notifications Sent
The number of syslog Message Generated
notifications that have been sent. This number
may include notifications that were prevented
from being transmitted due to reasons such as
resource limitations and/or non-connectivity. If
one is receiving notifications, one can periodically
poll this object to determine if any notifications
were missed. If so, a poll of the History Table may
be appropriate.
Notifications Enabled
Indicates whether notifications will or will not be
sent when a syslog message is generated by the
device. Disabling notifications does not prevent
syslog messages from being added to the History
Table.
Messages Ignored
Indicates the number syslog messages which
were ignored. A message will be ignored if it has a
severity value greater then Max Severity.