Specifications

Application View Cisco Terminal Server Application
Device Management Page 81 Cisco Router
Message Text
The actual message, up to 256 characters.
Message Temporary Banner
Select to use the message as a temporary banner
in addition to the normal banner.
Message send
The value used to determine what is done after
the message is sent.
Clear tty Line
The last line cleared.
Cisco Terminal Server Line View
Access: From the Icon Subviews menu for the
CiscoTSApp Application icon, select Line Table.
This view displays the following information on
each terminal server line connected to the Cisco
Router.
Status
The current state of this line. Possible states are:
Active and Inactive.
Type
The type of line. Possible types are: Unknown,
Console, Terminal, Line-Printer,
Virtual-Terminal, and Auxiliary.
Autobaud
Indicates whether or not the line will autobaud.
Speed In
The input speed of this line, displayed as a baud
rate.
Speed Out
The output speed of this line, displayed as a baud
rate.
Flow Control
The type of flow control in use on this line.
Possible flow control types are: Unknown, None,
Software-Input, Software-Output,
Software-Both, Hardware-Input, Hardware-
Output, and Hardware-Both.
Modem Control
The type of modem control in use on this line.
Possible modem control types are: Unknown,
None, Call-In, Call-Out, CTS-Required,
RI-IS-CD, and InOut.
Location
The physical location of this line.
Term Type
The type of terminal on this line.
Length in Lines
Length, in lines, of the terminal screen attached
to this line.