Specifications

Application View ATM Client Application
Device Management Page 75 Cisco Router
Creating VPL/VCL Models
1 Model the device that contains the ATM
application.
2 Proceed to the Application view and find the
ATM application icon.
3 Right-click the icon and select ATM Link
Modeling Options. You may select the
Option Explanations button to display
instructions on screen.
4 Set both Create Link Models and Create
VCL Models buttons to True. Save the
change.
5 Click the Reconfigure Now button. This will
create both VPL and VCL models.
6 Launch your Device Topology view.
7 Locate the port number associated with the
ATM application.
8 Go to the port's Sub-Interface view. You will
see the VPL/VCL models after the
reconfiguration is completed.
Destroying VPL/VCL Models
1 In the ATM Link Modeling Options view set
the Create Link Models button to False.
2 Save the changes.
3 Click the Reconfigure Now button. The
VPL/VCL models will be destroyed during the
reconfiguration.
4 Launch the Device Topology view.
5 Locate the port associated with the ATM
Application.
Go to the Sub-Interface view of the port. You
should not see the VPL/VCL models after the
reconfiguration is completed.
Note:
Note:
If you set Create Link Models to
True but Create VCL Models to
False, VCL models will not be
created during the reconfiguration.