Specifications

Application View ATM Client Application
Device Management Page 74 Cisco Router
ATM Link Modeling Options
Access: From the Icon Subviews menu for the
ATMClientApp Application icon, select ATM Link Modeling
Options.
This view provides you with a means to create a
model for each VCL and VPL configured on this
device. Use the Create Link Models button to
customize how models are created or destroyed
for the device. Normally, both VPL and VCL
models are created at the same time when the
device is configured. This view gives you the
option of creating VPL, VCL, or both models as
needed.
Setting the Create Link Models button and the
Create VCL Models button to True causes
SPECTRUM to create both VCL and VPL models.
You may set the Config Interval field in order to
set the intervals between link configurations. If
the Create Link Model button is set to False,
neither model will be created. This view contains
the following information.
This button can be set to either true or false.
Setting this button’s value to true causes a
model to be created for the VPLs.
This button can be set to either true or false.
Setting this button’s value to true causes a
model to be created for the VCLs.
Config Interval
This value represents the number of seconds
between link model configuration.
Clicking this button forces a link model
reconfiguration.
Clicking this button will display information on
the buttons and fields in this view and show you
how to force a link model reconfiguration.
Below are detailed instructions on how to create
and destroy VCL and VPL models.
Create Link Models
Create VCL Models
Reconfigure Now
Option Explanations