Specifications

Application View Cisco Ping Application
Device Management Page 68 Cisco Router
Cisco Ping Application
This application (CiscoPingApp) provides access
to the Ping Request Table View.
Ping Request Entry View
Access: From the Icon Subviews menu for the
CiscoPingApp Application icon, select Ping Request Entry
Table.
This view allows you to update the ping request
list for this device. The following information is
available for this view:
Ping Request Entries
Owner
The user who configured this entry.
Protocol
The protocol to use once an instance of this object
is created e.g., Novell, Apple Talk, Vines, etc.
Address
The address of the device to be pinged.
Status
The status of this table entry. Possible states are:
active, notInService, notReady,
createAndGo, createAndWait, and destroy.
Pkt Cnt
Specifies the number of ping packets to send to
the target device in this sequence.
Pkt Sz
Specifies the size of ping packets to send to the
target device in this sequence.
Pkt Timeout
Specifies the amount of time to wait for a
response to transmitted packet before declaring
the packet dropped.
Delay
Specifies the minimum amount of time to wait
before sending the next packet in a sequence after
receiving a response or declaring a timeout for a
previous packet.
Trap On
Specifies whether or not a ciscoPingCompletion
trap should be issued on completion of the
sequence of pings.
Pkts Sent
The number of ping packets that have been sent
to the target.
Pkts Rcvd
The number of ping packets that have been
received from the target in this sequence.