Specifications

Application View Cisco Flash Application
Device Management Page 67 Cisco Router
possible values are read_only and
run_from_flash.
Upgrade Method
The method by which new files can be
downloaded into the flash partition. Possible
values are unknown, rxbootFLH, and direct.
FLH stands for Flash Load Helper, a feature
provided on run-from-Flash systems for
upgrading Flash. This feature uses the bootstrap
code in ROMs to help in automatic download.
This field will return rxbootFLH if Status is
run_from_flash. If Status is read_only, the
upgrade method would depend on the reason for
the read_only status. For example, it may
require execution of a later version of software
that supports the Flash chips.
• unknown: the current system image does not
know how Flash can be programmed. A
possible method would be to reload the ROM
image and perform the upgrade manually.
• rxbootFLH: the Flash Load Helper is available
to download files to Flash. A copy-to-flash
command can be used and this system image
will automatically reload the Rxboot image in
ROM and direct it to carry out the download
request.
• direct: will be done directly by this image.
Flash Partitioning Operations Table
View
Access: From the Icon Subviews menu for the
CiscoFlashApp Application icon, select Partitioning
Operations.
This view displays the following information.
Command
The partitioning command to be executed.
Destination
The destination device name.
Partition Count
The number of partitions to be created.
Partition Sizes
The size of each partition to be created.
Status
The status of the specified partitioning process.
Notify On Completion
Whether a notification should be generated on the
completion of the copy operation.
Entry Status
The status of this table entry.
Time
The time taken for the operation.