Specifications

Application View Cisco Flash Application
Device Management Page 66 Cisco Router
Flash Miscellaneous Operations Table
View
Access: From the Icon Subviews menu for the
CiscoFlashApp Application icon, select Miscellaneous
Operations.
This view displays the following information.
Command
The command to be executed.
Destination
The destination file.
Status
The status of the specified operation.
Notify On Completion
Whether a notification should be generated on the
completion of the copy operation.
Entry Status
The status of this table entry.
Time
The time taken for the operation.
Flash Device Partition Properties
Table View
Access: From the Icon Subviews menu for the
CiscoFlashApp Application icon, select Partition
Properties.
This view displays the following information.
Name
The name for this partition used by the system.
Start Chip
The chip sequence number for the first chip in the
partition.
End Chip
The chip sequence number for the last chip in the
partition.
Size
The flash partition size.
File Count
The number of files in the partition.
Checksum Algorithm
The identifier for the checksum method used by
the file system. When a file system writes a file to
flash, it checksums the data written.
Status
Flash partition status. A status of read_write
indicates the partition is programmable. Other