Specifications

Application View Cisco Flash Application
Device Management Page 65 Cisco Router
This button adds the new copy operation to the
Flash Copy Operations Table (Page 63).
Flash Device Properties Table View
Access: From the Icon Subviews menu for the
CiscoFlashApp Application icon, select Device Properties.
This view displays the following information.
Name
The Flash device name.
Partitions
Number of partitions present.
Descriptions
System Flash (primary) and Boot Flash
(secondary).
Controller
The card that controls Flash read/write/erase.
Card
Index for the card in the card table.
Jumper
The state of the jumper that controls the
programming voltage to the Flash device. Possible
values include: unknown, where a programming
jumper is not present or not required or,
installed or not_installed where the
programming jumper state can be read back via a
hardware register.
Init Time
The time (system time) the device was initialized.
Flash File Properties Table View
Access: From the Icon Subviews menu for the
CiscoFlashApp Application icon, select File Properties.
This view displays the following information for
the files in a flash partition.
Name
The name for the file specified by the user copying
in the file.
Size
The size of the file in bytes.
Status
The status of the file.
Add Copy Operation