Specifications

Application View Cisco Flash Application
Device Management Page 63 Cisco Router
Flash Copy Operations Table View
Access: From the Icon Subviews menu for the
CiscoFlashApp Application icon, select Copy Operations.
This view displays the following information.
Command
The copy command to be executed.
Protocol
The protocol to be used for any copy. Default is
tftp.
Server Address
The server address for any copy. Default is
255.255.255.255.
Source Name
The source file name, either flash or on a server.
Destination Name
The destination address for any copy.
Remote User
The remote user name for copy through rcp
protocol.
Copy Status
The status of the specified copy operation.
Notify On Completion
Whether a notification should be generated on the
completion of the copy operation.
Entry Status
The status of this table entry.
This button accesses the Add Flash Copy
Operation view which contains the following
buttons and fields.
This button lets you set the copy command for a
new copy operation. Possible values are to flash
w/erase, to flash w/no erase, flash to net,
and FLH log to server.
This button lets you set the copy protocol for a
new copy operation. Possible values are tftp,
rcp, lex. The default is tftp.
This button lets you set whether or not a
notification should be generated upon completion
of the copy operation.
Server Address
This field lets you set the server address to be
used for the copy operation.
Add a Copy Operation
Copy
Protocol
Notify on Completion