Specifications

Application View Cisco Modem Application
Device Management Page 56 Cisco Router
Call Duration
This object specifies the call duration of the
current or previous call.
Call Phone Number
The dialed outgoing telephone number of the
current or previous call.
Caller ID
The incoming caller identification of the current
or previous call.
remoteHangup The remote side hangs up
the connection.
trainupFailure Failure to train up with a
remote peer.
fallbackTerminate User has EC fallback set to
disconnect.
excessiveEC Link loss due to excessive EC
retransmissions.
hostDrop Host initiated link drop.
terminate Lost Carrier Microcom
HDMS product relating to
password security issues.
autoLogonError An autologon sequence did
not complete successfully.
ccpNotSeen The Credit Card Prompt was
not detected.
Table 10: Disconnect Reasons (Continued)
Reason Code Meaning
callbackFailed A switched line dialback
occurred due to a leased line
connection failure, thus the
switched line connection also
failed and a connection can
still not be made on the
leased line.
blacklist In countries that support
blacklisting, an attempt was
made to go off hook with a
null dial string (ATD).
mnp10ProtocolError MNP10 Protocol Error
lapmProtocolError LAPM Protocol Error
faxClass2Error Fax Class 2 Error
Table 10: Disconnect Reasons (Continued)
Reason Code Meaning