Specifications

Application View Cisco Modem Application
Device Management Page 52 Cisco Router
Cisco Modem Application
This application (CiscoModemApp) has five menu
options that provide access to the following views.
• Modem System Information View
• Modem Line Status Table View (Page 53)
• Modem Line Configuration Table View
(Page 57)
• Modem Line Statistics Table View (Page 59)
• Modem Line Speed Statistics Table View
(Page 60)
Modem System Information View
Access: From the Icon Subviews menu for the
CiscoModemApp Application icon, select System Info.
Installed Modem
The actual number of modems that are currently
installed within this system.
Configured Group
The actual number of modem groups that are
currently configured within this system.
Watchdog Time
A passive software watchdog timer value will be
used to recover a modem that enters into an
unexpected state and hangs. When this watchdog
timer times out, the modem associated Call
Processing state will be set back to “IDLE,” all
related Time Division Multiplexing (TDM) paths
will be restored to default configurations, and all
call processing related actions will stop for the
modem.
Status Poll Time
The ideal time interval between modem status
polling via the out-of-band management port.
Max Retries
A reply event is expected to be received for every
message sent to the modem through the out-of-
band management port. If an expected reply event
is not received, the message will be sent to the
modem again. This object specifies the maximum
number of retries that will be executed.
Modems In Use
The number of modems in the system that are in
the following states: connected, offHook,
loopback, or downloadFirmware.
Modems Available
The number of modems in the system that are in
the onHook state, that is, they are ready to accept
a call.
Modems Unavailable
The number of modems in the system that cannot
accept calls. These modems are in a state other
than the following: connected, offHook,
loopback, or downloadFirmware.