Specifications

Application View Cisco STUN Application
Device Management Page 39 Cisco Router
STUN Route View
Access: From the Icon Subviews menu for the
CiscoSTUNApp Application icon, select STUN Route Table.
This view displays a table with information about
specific Synchronous Data Link Control (SDLC)
addresses. There is one table entry for each SDLC
address configured by the STUN ROUTE
command.
Station Addr
The poll address of the station. The variable “256”
indicates the ALL parameter on the STUN Route
command, which is the route for all unrecognized
addresses.
Type
The type of identification of the remote partner.
Remote IP
The IP address of the remote STUN partner.
Serial IF
The local interface index to the remote partner.
Priority
The priority with which this station’s traffic will
be routed across the network.
Peer State
The state of the peer connection through the
STUN tunnel.
Local Ack
Indicates if the STUN connection is locally
acknowledged.
Rx Packets
Count of frames received from the serial interface
with this station’s address.
Tx Packets
Count of frames transmitted at the serial
interface with this station’s address.
Rx Bytes
Count of bytes received from the serial interface
with this station’s address.
Tx Bytes
Count of bytes transmitted at the serial interface
with this station’s address.