Specifications

Application View Cisco STUN Application
Device Management Page 37 Cisco Router
BSTUN Routes View
Access: From the Icon Subviews menu for the
CiscoBSTUNApp Application icon, select BSTUN Routes.
This view displays an entry for each address
device for routing within the BSTUN group and an
entry for default routing if the “bstun route all”
command is configured. The following
information is available for this view.
Group
The index of the BSTUN Group owning this
station.
Address
The poll address of the station. A value of “256”
indicates the presence of the ALL parameter on
the STUN ROUTE command, which is the route
for all unrecognized addresses.
Type
The type of identification of the remote partner.
IP
The IP address of the remote BSTUN partner.
Priority
The priority with which this station’s traffic will
be routed across the network.
Peer State
The state of the peer connection through the
BSTUN tunnel.
Rx Packets
Count of frames received from the serial interface
with this station’s address.
Tx Packets
Count of frames transmitted at the serial
interface with this station’s address.
Rx Bytes
Count of bytes received from the serial interface
with this station’s address.
Tx Bytes
Count of bytes transmitted at the serial interface
with this station’s address.
Cisco STUN Application
This application (CiscoSTUNApp) has three menu
options that provide access to the following views.
These views provide configuration and operational
information on the blocked tunneling
implementation.
• STUN Group View (Page 38)
• STUN Port View (Page 38)
• STUN Route View (Page 39)