Specifications

Application View Cisco BSTUN Application
Device Management Page 36 Cisco Router
configured in the router at the other end of the
BSTUN tunnel.
Type
The protocol type for this BSTUN group.
Local Ack
Indicates whether the BSTUN connection is
locally acknowledged (True) or not locally
acknowledged (False).
Unroutable Transmit
The number of unroutable frames received by this
group from the remote partner. They were
unroutable because the address was not
recognized; that is, there is no BSTUN route
command configured for this address. This
indicates that the configuration in this router is
incompatible with the peer router.
Unroutable Receive
Count of frames received from a serial interface
with an unsupported poll address. Note that there
may be several ports configured within this
BSTUN group; a non-zero value in this field
indicates that at least one of these ports is
receiving frames for which there are no BSTUN
route commands configured. This indicates that
the configuration in this router is incompatible
with the configuration in at least one of the
attached devices.
BSTUN Ports View
Access: From the Icon Subviews menu for the
CiscoBSTUNApp Application icon, select BSTUN Ports.
This view identifies the serial interface to the BSC
line for which the router is providing serial
tunneling. It also identifies the BSTUN group that
the interface is in and the default routing for
unrecognized BSC addresses.
The following information is available from this
view.
Group
The group number to which the BSTUN port
belongs. Frames will only be routed to other ports
(on this or another router) in the same BSTUN
group.
Default Peer Type
The type of identification of the remote default
partner.
Default Peer IP
The IP address of the remote default BSTUN
partner, for unrecognized addresses.