Specifications

Application View XNS Routing Application
Device Management Page 35 Cisco Router
B-casts Forwarded
The number of broadcast packets forwarded from
another interface.
XNS Routing Application
This application (CiscoXNSApp) has two menu
options that provide access to pie charts that
display XNS statistics. Table 7 provides
definitions for the statistics presented by the pie
charts available for the Echos selection. The
Detail selection provides access to pie charts that
display standard Packet Breakdown, Error
Breakdown, and Discard Breakdown information.
Cisco BSTUN Application
This application (CiscoBSTUNApp) has three
menu options that provide access to the following
views:
• BSTUN Groups View
• BSTUN Ports View (Page 36)
• BSTUN Routes View (Page 37)
These views provide configuration and operational
information on the blocked tunneling
implementation.
BSTUN Groups View
Access: From the Icon Subviews menu for the
CiscoBSTUNApp Application icon, select BSTUN Groups.
This view identifies the group number and
protocol type that Cisco A and Cisco B use to
route BSC (Binary Synchronous Communication)
traffic over the IP network. The group number
must be the same in Cisco A and Cisco B to route
traffic from one router to the other.
The following information is available from this
view.
Index
The configured BSTUN (Block Serial Tunneling)
group number. The significance of this number is
that it must match the BSTUN Group number
Table 7: XNS Echo Statistics
Statistic Definition
Replies Rec The total number of XNS Echo reply
packets received.
Replies Sent The total number of XNS Echo reply
packets transmitted.
Request Rec The total number of XNS Echo request
packets received.
Request Out The total number of XNS Echo request
packets transmitted.