Specifications

Device View Interface Device View
Device Management Page 19 Cisco Router
Network Type Label
This label identifies the type of network the
interface is connected to. Double-click the label to
open the Model Information view for the interface.
Physical Address Label
This label displays the physical (MAC) address of
the interface. Double-click the label to open the
Interface Address Translation table, which cross-
references network addresses to MAC addresses
for selected nodes between networks. Double-
click any column entry to open an address-
specific Address Translation Table Information
view. This view provides the same information as
the corresponding row for the Interface Address
Translation table, but lets you modify field values.
IP Address Label
This label displays the IP address for the
interface. Double-click this label to open the
Secondary Address Panel View (Page 21), which
lets you change the address and mask for the
interface.
Sub-Interfaces Button
This button appears on an Interface icon when
the interface model has sub-interfaces associated
with it. Examples include a physical ATM
interface with Permanent Virtual Circuits (PVCs)
provisioned on it or a physical Frame Relay
interface with DCL circuits on it. The endpoints of
these multiplexed connections are modeled by
SPECTRUM as sub-interfaces. Double-click this
button to access the Sub-Interfaces Topology View
(Page 23).