Specifications

Device View Interface Device View
Device Management Page 18 Cisco Router
Interface Icons
Figure 3 illustrates an Interface icon from the
Interface Device view. Most of the informational
labels on the icon also provide double-click access
to other views, as explained in the following label
descriptions. The Sub-Interfaces button only
appears on certain Interface icons (see Sub-
Interfaces Button (Page 19).
Figure 3: Interface Icon
Interface Number Label
This label displays the interface (port) number.
IF Status Label
This label displays the current status of the
interface for the primary application selected,
e.g., Routing, MIB-II, etc. Table 1 lists the
possible label color representations. Note that the
color of the label also depends on the interface’s
current Administrative Status, which is set by the
user in the Interface Configuration view. This
view can be accessed by double-clicking the
Interface Type Label.
Interface Type Label
This label identifies the interface type (Ethernet,
ATM, etc.). Double-click this label to access the
Interface Configuration view. See the SPECTRUM
Views documentation.
c
f
b
1
ethernet
0:0:1D:F:FD:B6
a
a Interface Number Label
b IF Status Label
c Interface Type Label
d Network Type Label
e Physical Address Label
f IP Address Label
Ethernet0/0
0.0.0.0
d
e
ON
Sub-Interfaces Button (Page 19)
Table 1: Interface Status Label Colors
Color
Operational
Status
Administrative
Status
Label
Text
Green Up On ON
Blue Down Off OFF
Yellow Down On OFF
Red Testing Test Test