Specifications

Configuration Views Device Configuration View
Device Management Page 160 Cisco Router
Accesses the Redundancy and Model
Reconfiguration Options View.
Refer to the SPECTRUM Views documentation.
Accesses the Cisco Memory Pool Monitor Table
View (Page 161).
Accesses the Cisco Config-Copy Table View
(Page 162).
Accesses the Cisco Running Config Event/Alarm
Configuration View (Page 165).
Redundancy and Model
Reconfiguration Options View
Access: In the Device Configuration View, click the
Discover/Reconfigure Control button.
This view allows you to enable redundant
addresses, have SPECTRUM notify you of a
redundancy update, and reconfigure aspects of
your network connections.
This button opens the Preferred Addresses dialog
box which allows you to select the redundant
preferred address for the device.
Redundancy Administrative Status
Set this button to “Enabled” to cause SPECTRUM
to update this model with an address from the
Redundant Preferred Address list when the
primary address is not accessible.
Generate Redundancy Alarms
Set this button to “True” to cause SPECTRUM to
generate an alarm when a redundant address is
selected.
Automatically Reconfigure Interfaces
Set this button to “True” to cause SPECTRUM to
monitor the number of interfaces for this device.
If a change is detected by SPECTRUM, the
Discover/Reconfigure Control
IF Address Translation
Memory Pool Monitor
Config Copy Table
Running Configuration Changes
Preferred Addresses