Specifications

Application View Cisco HSRP Application
Device Management Page 153 Cisco Router
Virtual MAC Address
Mac Addresses used are as specified in RFC 2281.
For Ethernet and FDDI interfaces, a MAC address
will be in the range 00:00:0c:07:ac:00 through
00:00:0c:07:ac:ff. The last octet is the
hexadecimal equivalent of Hsrp Grp Number (0-
255). Some Ethernet and FDDI interfaces allow a
unicast MAC address for each HSRP group.
Certain Ethernet chipsets (LANCE Ethernet,
VGANYLAN and QUICC Ethernet) only support a
single Unicast Mac Address. In this case, only one
HSRP group is allowed. For Token Ring
interfaces, the following three MAC addresses are
permitted (functional addresses):
C0:00:00:01:00:00
C0:00:00:02:00:00
C0:00:00:04:00:00
Row Status
The control that allows modification, creation,
and deletion of entries.
Cisco HSRP Group Tracked Interface
Table View
Access: From the Icon Subviews menu for the
CiscoHSRPApp Application icon, select Tracked Interfaces
Info.
IF Index
The interface index value.
HSRP Group
This field along with the ifIndex of a particular
interface uniquely identifies an HSRP group.
Group numbers 0, 1 and 2 are the only valid
group numbers for Token Ring interfaces. For
other media types, numbers range from 0 to 255.
Each interface has its own set of group numbers.
There is no relationship between the groups
configured on different interfaces. Using a group
number on one interface does not preclude using
the same group number on a different interface.
For example, there can be a group 1 on an
Ethernet and a group 1 on Token Ring.
Tracked IF
The ifIndex of the tracked interface.