Specifications

Application View Cisco HSRP Application
Device Management Page 152 Cisco Router
Configured Hello Time
If Use Configured Timers (Page 151) is “true”, this
value is used when this router is an active router.
Otherwise, the Hellotime learned from the current
active router is used. All routers on a particular
LAN segment must use the same Hellotime.
Configured Hold Time
If Use Configured Timers (Page 151) is “true”, this
value is used when this router is an active router.
Otherwise, the Holdtime learned from the current
active router is used. All routers on a particular
LAN segment should use the same Holdtime.
Also, the Holdtime should be at least three times
the value of the Hellotime and must be greater
than the Hellotime.
Learned Hello Time
If the Hellotime is not configured on a router, it
can be learned from the Hello messages from the
active router, provided the Hello message is
authenticated. If the Hellotime is not learned from
a Hello message from the active router and it is
not manually configured, a default value of 3
seconds is recommended.
Learned Hold Time
If the Holdtime is not configured on a router, it
can be learned from the Hello message from the
active router. Holdtime should be learned only if
the Hello message is authenticated. If the
Holdtime is not learned and it is not manually
configured, a default value of 10 seconds is
recommended.
Virtual IP Address
The primary virtual IP address used by this
group. If this address is configured, this value is
used. Otherwise, the agent will attempt to
discover the virtual address through a discovery
process (which scans the hello messages).
Use Configured Virtual IP
If this field is True, Virtual IP Address was a
configured one. Otherwise, it indicates that
Virtual IP Address was learned.
Active Router
IP Address of the currently active router for this
group.
Standby Router
IP Address of the current standby router for this
group.
Standby State
The current HSRP state of this group on this
interface. Possible values are initial, learn,
listen, speak, standby, and active.