Specifications

Application View Cisco HSRP Application
Device Management Page 149 Cisco Router
Remote Sap
The SAP of the remote station to which this link
station should be connected. If this information is
not available, a length of zero for this object
should be returned.
Row Status
Used to create a new row or delete an existing row
in this table. Possible values are active,
notInService, notReady, createAndGo,
createAndWait, and destroy.
Cisco HSRP Application
This application (CiscoHSRPApp) supports the
CISCO-HSRP-MIB. This MIB module lets you
manage HSRP (Hot Standby Router Protocol)
groups. HSRP provides a means of setting up
redundant router connections among several
Cisco routers. HSRP designates one router as the
active router and holds all of the other routers in
the HSRP group in reserve. If the active router
fails, another router in the HSRP group
immediately takes over. The HSRP group is
represented by a virtual IP address which does
not change. Only the IP address of the active and
standby router(s) changes.
The Cisco HSRP application provides access to
the following views:
• Cisco HSRP Group Table View (Page 150)
• Cisco HSRP Group Tracked Interface Table
View (Page 153)
• Cisco Secondary HSRP IP Address Table View
(Page 154)
• Cisco HSRP Physical Interface Configuration
Table View (Page 155)