Specifications

Application View Cisco DLSW Application
Device Management Page 148 Cisco Router
Disc Reason Remote Data
Implementation-specific data reported by the
DLSw partner in a HALT_DL or
HALT_DL_NOACK, to help specify how and why
this circuit was last disconnected. If the partner
does not send this data in these messages, or the
DLSw implementation does not report receiving it,
a string of zero length is returned.
Cisco DLSW SDLC View
Access: From the Icon Subviews menu for the
CiscoDLSWApp Application icon, select Circuit.
This view provides the Dlsw LS Table and the field
described below.
Number of SDLC LS Entries
The number of entries in the Dlsw LS Table.
Dlsw LS Table
This table defines the virtual MAC addresses for
those SDLC link stations that participate in data
link switching and contains the following
information.
Index
The index of this table is the ifIndex value for the
SDLC port which owns this link station and the
poll address of the particular SDLC link station.
Local Mac
The virtual MAC address used to represent the
SDLC-attached link station to the rest of the
DLSw network.
Local Sap
The SAP used to represent this link station.
Local Block Num
The block number is the first three digits of the
node_id, if available. These 3 hexadecimal digits
identify the product and are not configurable.
Local Id Num
The ID number is the last 5 digits of the node_id,
if available. These 5 hexadecimal digits are
administratively defined and combined with the 3
digit block number form the node_id. This
node_id is used to identify the local node and is
included in SNA XIDs.
Remote Mac
The MAC address to which DLSw should attempt
to connect this link station. If this information is
not available, a value of zero for this object should
be returned.