Specifications

Application View Cisco DLSW Application
Device Management Page 138 Cisco Router
Cisco DLSW Transport
Connection TCP Operation View
Access: From the Icon Subviews menu for the
CiscoDLSWApp Application icon, select Transport
Connections > TCP Operation.
This view provides the Dlsw TConn TCP Oper
Table which is a list of TCP transport
connections. It contains the following
information.
Index
The index to the conceptual row of the table.
Keep Alive
The time in seconds between TCP keepAlive
messages when no traffic is flowing. Zero signifies
no keepAlive protocol is operating.
Pref Tcp
This is the number of TCP connections preferred
by this DLSw partner, as received in its
capabilities exchange message.
Tcp Connections
This is the actual current number of TCP
connections within this transport connection.
Cisco DLSW Interface View
Access: From the Icon Subviews menu for the
CiscoDLSWApp Application icon, select Interface.
This view provides the Dlsw If Table which is the
list of interfaces on which DLSw is active. It
contains the following information.
Index
A unique value for each interface.
Row Status
Used to create or delete the row entry in the
ciscoDlswIfTable following the RowStatus textual
convention. Possible values are active,
notInService, notReady, createAndGo,
createAndWait, and destroy.
Virtual Segment
The segment number that uniquely identifies the
virtual segment to which this DLSw interface is
connected. Current source routing protocols limit
this value to the range 0 - 4095. (The value 0 is
used by some management applications for
special test cases.) A value of 65535 signifies that
no virtual segment is assigned to this interface.
For instance, in a non-source routing
environment, segment number assignment is not
required.