Specifications

Application View Cisco DLSW Application
Device Management Page 132 Cisco Router
A larger receive window value may be appropriate
for partners that are reachable only via physical
paths that have longer network delays.
Opens
Number of times transport connections entered
connected state according to the definition of this
conceptual row.
Row Status
Possible values are active, notInService,
notReady, createAndGo, createAndWait, and
destroy. This value is used by a Management
Station to create or delete the row entry in the
ciscoDlswTConnConfigTable following the
RowStatus textual convention. The value of
notInService will be used to take a conceptual
row definition out of use.
Cisco DLSW Transport
Connection Operation View
Access: From the Icon Subviews menu for the
CiscoDLSWApp Application icon, select Transport
Connections > Operation.
This view provides the Dlsw TConn Operation
Table which is a list of transport connections. It
contains the following information.
Index
Identifier for this row.
Local T Addr
The local transport address for this transport
connection. This value could be different from
ciscoDlswTConnConfigLocalAddr, if the value of
the latter were changed after this transport
connection was established.
Entry Time
The value of ciscoDlswUpTime when this
transport connection conceptual row was created.
Connect Time
The value of ciscoDlswUpTime when this
transport connection last entered the connected
state. A value of zero means this transport
connection has never been established.