Specifications

Application View Cisco DLSW Application
Device Management Page 128 Cisco Router
Partner Reject
Indicates whether the DLSw is permitted to emit
partner reject related traps. With the value of
enabled the DLSw will emit all partner reject
related traps. With the value of disabled the
DLSw will not emit any partner reject related
traps. With the value of partial the DLSw will
only emits partner reject traps for CapEx reject.
The changes take effect immediately. Possible
values are enabled, disabled, and partial.
Prot Violation
Indicates whether the DLSw is permitted to
generate protocol-violation traps on the events
such as window size violation. The changes take
effect immediately.
Connection
Indicates whether the DLSw is permitted to emit
transport connection up and down traps. With
the value of enabled, the DLSw will emit traps
when connections enter connected and
disconnected states. With the value of
disabled, the DLSw will not emit traps when
connections enter connected and disconnected
states. With the value of partial the DLSw will
only emit transport connection down traps when
the connection is closed with busy. The changes
take effect immediately. Possible values are
enabled, disabled, and partial.
Circuit
Indicates whether the DLSw is permitted to
generate circuit up and down traps. With the
value of enabled, the DLSw will emit traps when
circuits enter connected and disconnected
states. With the value of disabled, the DLSw will
not emit traps when circuits enter connected and
disconnected states. With the value of partial
the DLSw will emit traps only for those circuits
that are initiated by this DLSw, e.g., originating
the CUR_CS message. The changes take effect
immediately. Possible values are enabled,
disabled, and partial.