Specifications

Application View Cisco DLSW Application
Device Management Page 126 Cisco Router
Cisco DLSW Node View
Access: From the Icon Subviews menu for the
CiscoDLSWApp Application icon, select Node.
This view provides the following information.
Version
This value identifies the particular version of the
DLSw standard supported by this DLSw. The first
octet is a hexadecimal value representing the
DLSw standard Version number of this DLSw,
and the second is a hexadecimal value
representing the DLSw standard Release number.
This information is reported in DLSw Capabilities
Exchange.
Version String
This string gives product-specific information
about this DLSw (e.g., product name, code release
and fix level). This flows in Capabilities Exchange
messages.
Vendor ID
The value identifies the manufacturer's IEEE-
assigned organizationally Unique Identifier (OUI)
of this DLSw. This information is reported in
DLSw Capabilities Exchange.
Std Pacing Support
Circuit pacing, as defined in the DLSw Standard,
allows each of the two DLSw nodes on a circuit to
control the amount of data the other is permitted
to send to them. This value reflects the level of
support an implementation has for this protocol,
as listed in Table 16.
Table 16: DLSw Standard Pacing Support
Value Meaning
none The node has no support for
the standard circuit pacing
flows; it may use RFC 1434+
methods only, or a
proprietary flow control
scheme.
adaptiveRcvWindow The node supports the
standard scheme and can
vary the window sizes it
grants as a data receiver.
fixedRcvWindow The node supports the
standard scheme but never
varies its receive window
size.