Specifications

Application View Cisco DLSW Ext Application
Device Management Page 124 Cisco Router
Time To Live
The amount of time (in hundredths of a second)
remaining before this fast cache entry will be
removed from the table. After 5 minutes of
inactivity, the fast cache entry will be deleted.
Cisco DLSW Ext Circuit View
Access: From the Icon Subviews menu for the
CiscoDLSWExtApp Application icon, select Circuit
This view provides the cde Circuit Table, which
is a list of circuits. Each new circuit will create a
conceptual row in the table. When the circuit
disconnects, the row will be deleted from the
table. End station 1 (S1) and End station 2 (S2)
are used to represent the two end stations of the
circuit. S1 is always an end station which is
locally attached. S2 may be locally attached or
remote. This table augments the
dlswCircuitTable and contains the following
information.
Index
A unique value identifying an entry in the table.
S1 Name
Represents the PU Name of End Station 1 (S1), if
available.
S2 Name
Represents the PU Name of End Station 2 (S2), if
available.
S1 Id Block
The block number is the first three digits of the
SNA Node id of End Station 1 (S1), if available.
These 3 hexadecimal digits identify the product.
S1 Id Num
The ID number is the last 5 digits of the SNA Node
id of End Station 1 (S1), if available. These 5
hexadecimal digits are administratively defined
and combined with the 3 digit block number form
the Node id. This Node id is used to identify the
local node and is included in SNA XIDs.