Specifications

Application View Cisco DLSW Ext Application
Device Management Page 122 Cisco Router
dlswTConnConfigTable and
dlswTConnConfigTDomain are imported from
DLSW-MIB (RFC 2024). This table contains the
following information.
Index
The index to the conceptual row of the table,
derived from dlswTConnConfigIndex.
If Index
The IfEntry index of the local interface, on which
the direct peer can be reached.
Media Encap
The type of media encapsulation to be used on
this peer connection. When using DLSw Direct-
encapsulation or DLSw Lite (Frame Relay)
encapsulation, the peer transport connection is
defined as either directHdlc or directFrameRelay,
respectively. Hdlc peer transport encapsulation
does not support local acknowledgment of frames.
Logical Link Control, Type2 (LLC2) peer transport
encapsulation -for transport across a point-to-
point connection (currently only Frame Relay is
supported) provides local acknowledgment and
reliable transport. Possible values are
directHdlc, directFrameRelay, and llc2. The
default value is directHdlc.
Relay DLCI
The Data Link Connection Identifier for the virtual
circuit on this interface. This field will only be
valid if the value of Media Encap (Page 122) is
llc2.
Cisco DLSW Ext Interface View
Access: From the Icon Subviews menu for the
CiscoDLSWExtApp Application icon, select Interface
This view provides the cde If Table. This table
lists the interfaces on which DLSw is active. The
cde If Table augments the dlswIfTable.
Index
The interface index for this entry.
If Type
The DLC protocol in use on this DLSw interface.
Possible values are other, na, llc, sdlc, and
qllc.