Specifications

Application View Cisco DLSW Ext Application
Device Management Page 121 Cisco Router
Cisco DLSW Ext Transport
Connection Specific View
Access: From the Icon Subviews menu for the
CiscoDLSWExtApp Application icon, select Transport
Connections > Specific.
This view provides the cde TConn Tcp Config
Table. This table defines the TCP transport
connections that will be either initiated by or
accepted by this DSLw. It augments the entries in
dlswTConnConfigTable whose domain is
dlswTCPDomain. In other words, for each
conceptual row in the dlswTConnConfigTable, if
the dlswTConnConfigTDomain is
dlswTCPDomain, that conceptual row will be
augmented by this table. dlswTCPDomain,
dlswTConnConfigTable, and
dlswTConnConfigTDomain are all imported from
DLSW-MIB (RFC 2024). This table augments
dlswTConnTcpConfigTable and contains the
following information.
Index
The index to the conceptual row of the table,
derived from dlswTConnConfigIndex.
Queue Max
Maximum output TCP queue size for this remote
peer. For DLSw over TCP encapsulation, packets
may be queued due to congestion of the TCP
network. This variable is used to set the output
queue maximum of the underlying TCP
connection for the peer represented by the
conceptual row.
Cisco DLSW Ext Transport
Connection Direct Config View
Access: From the Icon Subviews menu for the
CiscoDLSWExtApp Application icon, select Transport
Connections > Direct Configuration.
This view provides the cde TConn Direct Config
Table. This table contains direct peer media-
specific configuration information. An entry is
maintained for every peer in the
cdeTConnConfigTable (Page 116) whose domain
is either cdeDirectHdlcDomain,
cdeDirectFrameRelayDomain, or cdeLlc2Domain.
In other words, for each conceptual row in the
dlswTConnConfigTable, if the
dlswTConnConfigTDomain is either
cdeDirectHdlcDomain,
cdeDirectFrameRelayDomain, or cdeLlc2Domain,
there will be an entry in this table.