Specifications

Application View Cisco VPDN Application
Device Management Page 106 Cisco Router
Active Sessions
The number of active sessions currently in the
tunnel.
Denied Users
The number of users denied access to the tunnel.
Soft Shut
Indicates whether a state of “soft-shutdown” has
been initiated, and if so, prevents any new
sessions from being added.
Network Service Type
The type of network service used in the active
tunnel.
Local IP Addr
The local IP address of the tunnel. This IP address
is that of the interface at the local end of the
tunnel.
Source IP Addr
The Source IP address of the tunnel. This IP
address is the user configurable IP address for
Stack Group Biding Protocol.
Remote IP Addr
The remote IP address of the tunnel. This IP
address is that of the interface at the remote end
of the tunnel.
Table 12: Tunnel Attr States
State Description
unknown The current state of the tunnel is
unknown.
l2fOpening The tunnel has just been initiated
and is waiting for a reply from the
remote end to complete the process.
l2fOpenWait This end received a tunnel open
request from the remote end and is
waiting for the tunnel to be
established.
l2fOpen The tunnel is active.
l2fClosing This end received a tunnel close
request.
l2fCloseWait The tunnel has just been shut down
and is waiting for the remote end to
reply in order to complete the
process.
l2tpIdle No tunnel is initiated yet.
l2tpWaitCtlReply The tunnel has been initiated and is
waiting for a reply from the remote
end to complete the process.
l2tpEstablished The tunnel is active.
l2tpShuttingDown The tunnel is in the process of
shutting down.
l2tpNoSessionLeft There is no session left in the tunnel.